Replacing the brush cutter trimmer line on a brush cutter or weed trimmer is a simple process, though it can vary slightly depending on the model. Here’s a general guide for replacing the trimmer line on most brush cutters:
Steps to Replace the Trimmer Line:
- Turn Off the Brush Cutter: Ensure the brush cutter is turned off and disconnected from the power source (if electric) or engine turned off (if gas-powered) for safety.
- Remove the Trimmer Head Cover:
- Find the cap or cover on the trimmer head.
- Push in the tabs on the sides or unscrew the cap, depending on your model, to remove the cover.
- Remove the Old Trimmer Line:
- Pull out any remaining line from the spool.
- Clear any debris or stuck grass from the trimmer head to ensure smooth operation.
- Prepare the New Trimmer Line:
- Cut a suitable length of line, usually between 10-20 feet (depending on your model).
- Fold the brush cutter trimmer line in half to make two equal lengths (if it’s a dual-line trimmer).
- Wind the Trimmer Line:
- Look for arrows or markings on the spool that indicate the direction to wind the brush cutter trimmer line.
- Insert the two ends of the brush cutter trimmer line into the holes or slots on the spool and wind them tightly and evenly, leaving about 6-8 inches of line on both ends.
- Secure the Line:
- Once the brush cutter trimmer line is wound, secure the ends in the notches or holes provided on the spool to prevent it from unraveling.
- Reassemble the Trimmer Head:
- Place the spool back into the trimmer head.
- Thread the two ends of the brush cutter trimmer line through the eyelets or holes on the sides of the trimmer head.
- Reattach the cover or cap, making sure everything is securely locked in place.
- Extend the Trimmer Line:
- Pull the ends of the brush cutter trimmer line to ensure they are released and extend to the correct length.
- If necessary, tap the trimmer head to activate the auto-feed mechanism (for models with this feature).
- Test the Trimmer:
- Reconnect the power or start the engine.
- Give the trimmer a quick test to ensure the brush cutter trimmer line is feeding correctly and trimming properly.